Receiving a P1345 code on your Chevy or GMC vehicle will read out as “Crankshaft Position-Camshaft Position Correlation”. While this error code can be caused by a faulty camshaft position sensor (CMP) or crankshaft position sensor (CPS), the issue a lot of the time relates to engine timing.
- How do I fix error code P1345?
- What does a P1345 code mean?
- What does camshaft to crankshaft position correlation fault mean?
- What is a camshaft to crankshaft correlation fault?
- How serious is a P0016?
- How serious is a crankshaft position sensor?
- How do I fix error code P0016?
- How do I fix code po1345?
- Is it safe to drive with P0016 code?
- What can cause code P0016?
How do I fix error code P1345?
- Replace crankshaft position sensor. - Replace camshaft sensor. - Repair the PCM. - Repair open or short in ignition coil power supply. - Check if the distributor is installed properly and fix it.
What does a P1345 code mean?
Toyota and Lexus specifies that fault code P1345 is indicative of a variable valve timing sensor-related issue, on the engine's left-hand bank. Alternatively, both Audi and Volkswagen state that DTC P1345 denotes a short to ground condition, within a vehicle's ignition amplifier circuit.
What does camshaft to crankshaft position correlation fault mean?
The error code P0016 is triggered when the bank 1 camshaft position sensor doesn't match the signal from the crankshaft position sensor. This can cause various issues with the overall functioning of the engine and can lead to increased fuel consumption and rough engine idling.
P1345 Code Fix! Chevy, Gmc, Silverado, Suburban Etc
What is a camshaft to crankshaft correlation fault?
https://www.youtube.
How serious is a P0016?
How serious is the P0016 code? This particular OBD-II trouble code is deemed to be severe as your camshaft and crankshaft aren't lining up correctly. The timing chain may have issues with guides or tensioners, leading to engine damage if the valves hit the pistons.
How serious is a crankshaft position sensor?
Driving with a failing crankshaft position sensor can be difficult and potentially dangerous. It could lead to long-term vehicle damage and expensive repairs, or even stop the car from working at all.
How To Fix P1345 Code Chevy 5.7 Vortec Engine
How do I fix error code P0016?
- Repair the wiring or connections to the components, including the camshaft sensor or camshaft OCV. - Check the timing chain and guides and replace if needed. - Replace the camshaft OCV for bank 1 exhaust camshaft.
How do I fix code po1345?
- Loose the distributor hold down bolt with engine OFF. - Make sure your OBD scanner is plugged in to monitor the Cam Retard Offset reading. - Turn the engine on, let it warm to normal operating temps, and get the rpm's above 1,000. - If your reading is negative, turn the distributor counterclockwise.
P1345 Code! Chevy 4.3 And 5.7! Why Distributor Won’T Line Up On Tdc
Is it safe to drive with P0016 code?
Repair Urgency: Fix this code immediately (same day if possible) to avoid internal engine damage. Diagnosis: This trouble code can cause the vehicle to be hard to start and run rough. In some cases, the vehicle may not be driveable. It should be addressed as soon as possible.
What can cause code P0016?
- Defective or corroded wiring or connections. - CKP sensor issue. - CMP sensor issue. - Stretched timing chain. - Mechanical faults such as the timing chain jumped teeth, a slipped reluctor ring on the crankshaft or slipped reluctor ring on bank 1 exhaust camshaft. - Camshaft phaser problem.